Where AddPly fits
AddPly takes a part from STEP CAD to regions, a checked ply stack, layer and section views, a plybook and an AddPath package, and runs hosted drape studies and linear FEA with maximum-stress screening, within stated limits. AddPath plans the fibre-placement paths; the course teaches the theory behind drape and failure on its own simulations.
Predict · at 0:44 in the video
So: does AddPly tell you whether this spar will break?
Not on its own. Its hosted linear FEA can screen ply stresses against strength cards, but it models no fatigue, buckling, delamination or progressive failure, and typical strengths are not guaranteed minimums. The judgement stays yours.
This course is our own. These books go deeper.
- Basic Mechanics of Laminated Composite Plates, A. T. Nettles, NASA Reference Publication 1351, 1994
- Mechanics of Composite Materials, R. M. Jones, Taylor & Francis, 2nd ed., 1999
- Engineering Mechanics of Composite Materials, I. M. Daniel & O. Ishai, Oxford University Press, 2nd ed., 2006
- Design and Analysis of Composite Structures, C. Kassapoglou, Wiley, 2nd ed., 2013
- Composite Materials Handbook (CMH-17), Volume 3, Rev. G, CMH-17, SAE International, 2012
The course designs in AddPly, our browser app for laminate design: regions, ply stacks with live stacking-rule checks, thickness, mass and the ply book, plus hosted drape studies and linear FEA with maximum-stress screening, within their stated limits. The lessons teach the theory behind those on our own simulations, so you can judge the results. AddPly needs an Addcomposites sign-in.
Simulations in this lesson are our own. Ply data come from the datasheet or textbook named on screen; where a number rests on an assumption, the video says so.